• Mon - FRI 9.00 - 14.00
  • Ctra. Lorca-Baza Km, 72,2, 04800 Albox, Almería
  • +34 950-173-200
TuneLab – PERFORMANCE REMAP SPECIALISTS

CHECK YOU CAR BELOW

SELECT YOUR VEHICLE

– ECU Remapping in Albox, Almería – Unlock Your Vehicle’s Full Potential

Looking for professional ECU remapping in Albox, Almería? At PadPall Motors – TuneLab , we specialize in custom engine tuning solutions that boost your vehicle’s performance, fuel efficiency, and driving experience. Whether you have a fleet of vehicles or drive a diesel or petrol car, van, or 4×4, our expert technicians use the latest diagnostic tools and remapping software to safely enhance horsepower and torque—all tailored to your driving needs and specific vehicle.

We serve local drivers across Albox, Huércal-Overa, Arboleas, and the wider Almería region, offering both in house and mobile ECU remapping, DPF/EGR solutions, and performance tuning with guaranteed results. Join our satisfied customers who trust us for reliable, tested, and road-safe tuning services in southern Spain. TuneLab are an Authorised dealer of Celtic Tuning UK.

EGR SOLUTIONS

We can blank or remove the Exhaust Gas Recirculation (EGR) valve without the limp mode error fault being triggered. This can help eliminate recurrent problems arising from a problematic EGR valve.

REV LIMITER REMOVAL

At our ficilities in Albox, Almeria, we can improve an engine’s throttle response – and therefore the car’s on-road performance – by increasing the rev limiter. It means, effectively, that with each change-up of gears the revs will be higher.

DPF SOLUTIONS

We can remove Diesel Particulate Filters (DPF) from any vehicle, but – in line with UK and European regulations – that vehicle can then only be used off-road. We offer this service in Albox, Almeria for off road 4X4 drivers and others.

02 SOLUTIONS

The O2 sensor is the key sensor in the engine fuel control feedback loop and controls the volume of oxygen in the exhaust gases and fuel mixture.

Once deleted, de-cat pipes can safely be installed. We can carry out this work at our facilities in Albox, Almeria. PadPall Motors.

VMAX REMOVAL

Taking out the vehicle’s maximum speed limiter means the car’s free to achieve its engine’s fullest potential.

LAUNCH CONTROL

Where this is not already installed, we can install it; it’s an electronic system which aids acceleration from a standing start.

STAGE 1 REMAP

Stage 1 tuning offers a range of benefits for vehicle owners seeking improved performance without compromising reliability. This entry-level upgrade typically involves recalibrating the engine control unit (ECU) to optimize parameters such as fuel delivery, ignition timing, and turbo boost (if applicable), all within the safe limits of the stock components. As a result, drivers can experience increased horsepower and torque, with up to as much as 50% gains and smoother throttle response, and enhanced fuel efficiency under certain conditions. Because Stage 1 tuning does not require any physical modifications to the engine or exhaust system, it is a cost-effective and easily reversible way to boost performance while maintaining factory safety margins and emissions compliance in many cases.

STAGE 2

Stage 2 remapping builds on the gains of Stage 1 by combining ECU tuning with supporting hardware upgrades, such as a high-flow exhaust system, performance air intake, or intercooler enhancements. These modifications allow the engine to breathe and operate more efficiently, enabling the remap to deliver significantly higher power and torque compared to Stage 1. Benefits include sharper acceleration, improved throttle response, and a more engaging driving experience. While Stage 2 offers greater performance, it requires quality aftermarket parts and may affect emissions compliance or warranty coverage, making it best suited for enthusiasts seeking a more aggressive setup

THE RIGHT CHOICE

With the new KESS 3 it’s the right choice for your vehicle. Irresespective of your specific requirements the KESS 3 and its leader cutting edge technology should be the only choice when it comes to assuring a fast and reliable solutions to unleash more power in your vehicle.

Alientech are present in up to 120 countries across the globe and have been market leaders since 1994 and are at the forefront of ECU / TCU and gearbox tuning.

KESS3

Thanks to thirty years of experience and nearly three years of development, KESS3 is the most advanced engineering achievement ever conceived in the Chiptuning industry. Alientech has made a significant breakthrough to create something unique and extraordinary, which has no equal in the market, in terms of functions, convenience, and versatility.

The KESS 3

The KESS3 has been developed to provide a quik and simple interface to any engine control unit and automatic gearbox on the market while avoiding invasive tuning where many technicians will need to remove the ECU / TCU for bench tuning.

The KESS3 has sensational performance, high operational flexibility and ease of use that allow us to interface with engines and gearbox control units with a single tool.

RENEWED ARCHITECURE

The NEW microprocessor, latest generation I/O interfaces, new built-in sensors and high-performance EEPROM and FLASH memories are the main features of KESS3.

The KESS 3 has the most powerful microprocessor on the market. 7 times more powerful than the previous generations. Pure power that can execute your commands reliably, faster and more efficiently.

THE RIGHT CHOICE

With the new KESS 3 it’s the right choice for your vehicle. Irresespective of your specific requirements the KESS 3 and its leader cutting edge technology should be the only choice when it comes to assuring a fast and reliable solutions to unleash more power in your vehicle.

Alientech are present in up to 120 countries across the globe and have been market leaders since 1994 and are at the forefront of ECU / TCU and gearbox tuning.

DEVELOPMENT FACILITIES

We have 2 state of the art 4WD linked dynamometer cells with full engine analysis capabilities to ensure our developments are providing you with the best power gains on the market whilst maintaining optimum reliability for your engine.

Our investment in dyno facilites means that our development programmes can work side by side allowing us to cover a wider range of makes and models.

DEVELOPMENT FACILITIES

We have 2 state of the art 4WD linked dynamometer cells with full engine analysis capabilities to ensure our developments are providing you with the best power gains on the market whilst maintaining optimum reliability for your engine.

Our investment in dyno facilites means that our development programmes can work side by side allowing us to cover a wider range of makes and models.

DEVELOPMENT FACILITIES

We have 2 state of the art 4WD linked dynamometer cells with full engine analysis capabilities to ensure our developments are providing you with the best power gains on the market whilst maintaining optimum reliability for your engine.

Our investment in dyno facilites means that our development programmes can work side by side allowing us to cover a wider range of makes and models.

DEVELOPMENT FACILITIES

We have 2 state of the art 4WD linked dynamometer cells with full engine analysis capabilities to ensure our developments are providing you with the best power gains on the market whilst maintaining optimum reliability for your engine.

Our investment in dyno facilites means that our development programmes can work side by side allowing us to cover a wider range of makes and models.

OUR EXPERIANCE IS YOUR REASSURANCE

   

TuneLab is part of the Celtic Tuning Group based Unit 3a, Quintdown Business Park, West Road,Newquay, Cornwall, TR8 4DS, United Kingdom (UK). Celtic Tuning are specialists in the development of engine management software and have a specialist team of graduate level software developers. All of their software development is carried out in house using their state of the art facilities which very few companies can rival, even internationally.

Celtic Tuning have 2 state of the art 4WD linked dynamometer cells with full engine analysis capabilities to ensure the developments are providing its dealers with the best power gains on the market whilst maintaining optimum reliability for your engine.

There investment in dyno facilites means that the development programmes can work side by side allowing them to cover a wider range of makes and models

The dealer network which TuneLab is part of is spanning 33 countries and have an unrivalled level of experience in working with engines operating in all working conditions and environments.

Contact TuneLab

    I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

    [celtic-tuning-vehiclesheet]

    Compare